INVERTO IDLU-UST112-CUO1O-8PP
.png)
| Inputs | 4 x Satellite IF Inputs from Quattro LNB |
| 1 x UHF / VHF Input from Terrestrial Antenna | |
| Outputs | 4 x Loopthrough Satellite IF Output |
| 1 x Loopthrough Terrestrial Output | |
| 1x Legacy Output with combined Terrestrial Signal | |
| 1x Unicable Output for 8 Receiver Max. with combined Terrestrial Signal | |
| Control Protocol | DiSEqC Extension Commands per EN50494 |
| Input Frequency Ranges: | . |
| Satellite | 950 ~ 2150 MHz |
| Terrestrial | 47 ~ 862 MHz |
| Loop-Through Loss | . |
| Satellite | - 3 dB Max. |
| Terrestrial | - 3 dB Max. |
| Conversion Gain: | . |
| Unicable Output | + 10 ~ + 20 dB |
| Legacy Universal Output | - 1 ~ + 7 dB |
| Output Signal Level (AGC controlled) | 93 dBμV |
| Input Power Range | - 45 ~ - 15 dBm |
| User Band (Channel) Bandwidth | 40 MHz |
| User Band (Channel) Gain Ripple | 3 dB Max. |
| User Band Frequencies (Channels) | CH 0 : 1076.06 MHz |
| CH 1 : 1178.12 MHz | |
| CH 2 : 1280.18 MHz | |
| CH 3 : 1382.24 MHz | |
| CH 4 : 1484.30 MHz | |
| CH 5 : 1586.36 MHz | |
| CH 6 : 1688.42 MHz | |
| CH 7 : 1790.48 MHz | |
| RF Isolation: | . |
| Satellite/Satellite IF | 28 dB Min. |
| Satellite/Terretsrial | 35 dB Min. |
| Satellite Channel/Channel (User Bands) | 28 dB Min. |
| LO Phase Noise | @1 KHz: - 92 Max. dBc/ Hz |
| @10 KHz: - 101 Max. dBc/ Hz | |
| @100 KHz: - 99 Max. dBc/ Hz | |
| @1 MHz: - 103 Max. dBc/ Hz | |
| Integrated Phase Noise | 1.5 Degrees Max. |
| Input / Output VSWR | 2.5 : 1 |
| Input / Output Impedance | 75 Ω |
| Input / Output Connector | F-Type |
| LNB Input | V/L=>13V/0kHz , V/H=>13V/22kHz |
| H/L=>18V/0kHz , H/H>18V/22kHz | |
| LNB power supply | 13/18V, max 300mA |
| DC Current Consumption | 320mA @20VDC [max.] |
| Operating Temperature | - 34 °C ~ + 60 °C |
| Dimensions | 151 x 110 x 22.8 (H x W x D) mm |